instax2type100-r2-mk1-notext

A 3D Printable Instax holder for Polaroid pack film cameras and backs

Around the time Fuji announced the discontinuation of FP100C I was experimenting with Instax film in old Polaroid Land cameras. Using an old Fuji or Polaroid cartridge as a film holder works, but they’re not the easiest thing to take

instax2type100-r2-mk1-notext

A 3D Printable Instax holder for Polaroid pack film cameras and backs

Around the time Fuji announced the discontinuation of FP100C I was experimenting with Instax film in old Polaroid Land cameras. Using an old Fuji or Polaroid cartridge as a film holder works, but they’re not the easiest thing to take

film carrier

A 3D Printable film and slide carrier for DSLR scanning

This is something I made to make “scanning” film and slides with a digital camera easier. The base layer shown above sits on a lightbox and has a recessed channel for loose film with a central square area for mounted

film carrier

A 3D Printable film and slide carrier for DSLR scanning

This is something I made to make “scanning” film and slides with a digital camera easier. The base layer shown above sits on a lightbox and has a recessed channel for loose film with a central square area for mounted

yorkshire [6924]

Yorkshire through a plastic lens

I was probably about five when I took these, back when everything was so much bigger and even the most mundane things were new and exciting.

yorkshire [6924]

Yorkshire through a plastic lens

I was probably about five when I took these, back when everything was so much bigger and even the most mundane things were new and exciting.

pride 2012 [6809]

Black and white rainbows

Weekend project: What does a pride festival look like stripped of the rainbows and colours we usually associate with it?

pride 2012 [6809]

Black and white rainbows

Weekend project: What does a pride festival look like stripped of the rainbows and colours we usually associate with it?

ecb-circuit

An Improved Metz 45 CT-1 Manual Power Mod (with auto)

Introduction The aim of this project was to add manual power adjustment without removing the original auto functionality of the flash. Existing mods involve removing the light sensor and replacing it with a variable resistor or a series of switched

ecb-circuit

An Improved Metz 45 CT-1 Manual Power Mod (with auto)

Introduction The aim of this project was to add manual power adjustment without removing the original auto functionality of the flash. Existing mods involve removing the light sensor and replacing it with a variable resistor or a series of switched

45CT1 Circuit diagram

Metz 45 CT-1 Circuits

I spent far too long searching for these, so I thought I’d share. These are for the low voltage version, but the high voltage version appears to be almost identical.

45CT1 Circuit diagram

Metz 45 CT-1 Circuits

I spent far too long searching for these, so I thought I’d share. These are for the low voltage version, but the high voltage version appears to be almost identical.

IR_single

Digital Infrared Photography

The Idea Digital sensors are sensitive to infrared light as well as the visible spectrum. Usually this is a bad thing for normal photos, so most cameras have an infrared blocking filter in front of the sensor which stops most

IR_single

Digital Infrared Photography

The Idea Digital sensors are sensitive to infrared light as well as the visible spectrum. Usually this is a bad thing for normal photos, so most cameras have an infrared blocking filter in front of the sensor which stops most